Conical-Bottom Tanks
- 30° cone angle (18° for 400 gallons, 45° for 500 gallons)
- Complete drainage
- Better dispersal of solids
- Easy installation of welded or bulkhead fittings
- HDPE and polypropylene resins comply with 21 CFR Reg. 177.1520 PVDF 21 CFR 177.2510
- Require metal stands
- Clearance from the floor to bottom of the tank is 18 inches (12 inches on 10-gallon tank)
Note: Never use FRP casings alone as a tank. Always use a liner. Always use an FRP casing with your tank for continuous service at elevated temperatures, or storage of high specific-gravity materials.
Conical Bottom Cylindrical Tanks -- Nominal Wall Thickness by Resin |
| HDPE | XLPE | PP | PVDF | Casing | Approx Shipping |
|---|
Size (gal) | Size Code | Grad. (gal/ liter) | Nom/Dim
(O.D. x Depth*) | Bottom
Flat Dia | Nat Cat No 16120 | Nat Cat
No 16320 | Nat
Cat No 16220 | Nat Cat No 16520 | 17000 | (wt, lbs Tank) | (wt, lbs Tank
w/Casing) |
|---|
10 | -0010 | 1/5 | 13-1/4 x 23 | 3 | 5/32 | 5/32 | 5/32 | 3/32 | N/A | 10Å | N/A |
30 | -0030 | 2.5/10 | 18 x 35 | 3 | 3/16 | 3/16 | 3/16 | 3/32 | 3/32 | 18 | 37 |
55 | -0055 | 2.5/10 | 22 x 44 | 3 | 3/16 | 3/16 | 3/16 | 1/8 | 3/16 | 34 | 53 |
100 | -0100 | 5/20 | 32 x 38 | 5 | 1/4 | 1/4 | 1/4 | 1/8 | 3/16 | 48 | 95 |
150 | -0150 | 5/20 | 32 x 57 | 5 | 1/4 | 1/4 | 1/4 | 1/8** | 3/16 | 82 | 150 |
250 | -0250 | 25/100 | 32 x 57 | 5 | 5/16 | 5/16 | 5/16 | 1/8** | 3/16 | 112 | 241 |
400 | -0400 | 25/100 | 56 x 52 | 7 | 3/8 | 3/8 | 3/8 | N/A | 1/4 | 140 | 230 |
500 | -0500 | 25/100 | 53 x 80 | 7 | 5/16 | 5/16 | N/A | N/A | 1/4 | 215 | 331 |
| Maximum Service Temperature | 140°F
60°C | 140°F
60°C | 220°F
104°C | 230°F
110°C | |
*To cone flat
N/A = Not Available
**Casing required
Å = Within UPS size restrictions
Cone Angles: 30° on 10, 30, 55, 100, 150, 250 gallon; 18° on 400 gallon & 45° on 500 gallon |
Contact our customer service hoteline at:
New Jersey, U.S. +1 800-435-3992
Outside U.S. +1 908-218-8888