Fittings and Accessories
Page jumps are provided for easier access to items on the page.
Welded Fittings must be of the same resin as the tank on which they will be installed. Fittings cannot be welded to XLPE tanks.
A. Full Coupling
B. Flanged Coupling
C. Half Nipple
D. Half Coupling
E. Flanged Coupling w/o side supports
Open Top Tanks, Installed Fittings, Welded (Sanitary options available) |
| | Size Code and Availability (x) |
| Fitting | Mat'l | B=Blk
N=Natl | Cat No | -0025
1/4" | -0050
1/2" | -0075
3/4" | -0100
1" | -0125
1-1/4" | -0150
1-1/2" | -0200
2" | -0300
3" | -0400
4" | -0600
6" |
| A. Full Couplings, Female Threads | PE | B | 87005 | -- | x | x | x | -- | x | x | x | x | -- |
| PP | N | 89005 | -- | x | x | x | -- | x | x | -- | -- | -- |
| PVDF | N | 87006 | -- | x | x | x | -- | x | x | -- | -- | -- |
| Specify installation with one end flush inside of tank, or half in/half out. Coupling will be installed half in/half out unless otherwise specified. For room temperature service only. Specify nipples for service above 70°F/21°C and below 140°F/60°C. |
| B. Flanged Couplings w/HDPE Flange (Avail. w/wo side supports) | PE | B | 93400 | -- | x | x | x | -- | x | x | x | x | x |
| HDPE flanges are one-piece, all-plastic with 150 lbs ASA bolt pattern dimensions. |
| Spigot, Needle-Type w/Boss and Two Teflon® TFE O-rings | PP Spigot w/HDPE Boss | N | 96423 | -- | -- | -- | x | -- | -- | -- | -- | -- | -- |
| For HDPE tanks up to 100 gallons. For larger tanks, use valves. PP spigots are installed on threaded HDPE boss, which is spin-welded onto tank at factory. Spigot has 1-1/8 - 12 straight female threads, 3/8 inch opening. Accepts 5/8 inch I.D. tubing. Boss fits only HDPE tanks. |
| C. Half Nipples, Male Threads | PE | B | 93857 | -- | x | x | x | -- | x | x | x | x | -- |
| HDPE (FDA) | N | 93859 | -- | x | x | x | -- | x | x | -- | -- | -- |
| PP | N | 95857 | -- | x | x | x | -- | x | x | x | -- | -- |
| PVDF | N | 93858 | -- | x | x | x | -- | x | x | -- | -- | -- |
| D. Half Couplings, Female Threads | PE | B | 93840 | -- | x | x | x | -- | x | x | x | x | -- |
| PP | N | 95840 | -- | x | x | x | -- | x | x | -- | -- | -- |
| PVDF | N | 93841 | -- | x | x | x | -- | x | x | -- | -- | -- |
| For room temperature service only. Specify nipples for above 70°F/21°C and below 140°F/60°C. |
Back to Top
Loose Accessories
F. Sight Gauge Assembly
G. Close Nipple
H. Female Ball Valve
I. Tubing Adapter
J. Spigot
Open Top Tanks -- Loose Fittings, Mechanical |
| | Side Code and Availability (x) |
| Fitting | Mat'l | Cat No | -0025
1/4" | -0050
1/2" | -0075
3/4" | -0100
1" | -0125
1-1/4" | -0150
1-1/2" | -0200
2" | -0300
3" | -0400
4" | -0600
6" |
| F. Sight-Gauge Assembly | PE/PVC | 96000
-0001 | -- | x | -- | -- | -- | -- | -- | -- | -- | -- |
| Consists of PVC valves, fittings and translucent PE tubing (5/8 inch I.D. x 3/4 inch O.D.). Specify tubing length. |
| G. Close Nipples | PVC | 97103 | -- | x | x | x | x | x | x | x | x | -- |
PP | 98103 | -- | x | x | x | x | x | x | x | x | -- |
| H. Ball Valves, Threaded | PVC | 97003 | -- | x | x | x | x | x | x | -- | -- | -- |
PP | 98003 | -- | x | x | x | x | x | x | -- | -- | -- |
| Female pipe thread on both ends. These valves must be supported. Installed with 93857 nipples, 97001 or 98001 bulkhead fittings and 97103 or 98103 close nipples. |
| I. Tubing Adapter (Insert-type), Male Thread | PVC | 97006 | -- | x | x | x | -- | x | x | -- | -- | -- |
| For Saint-Gobain Performance Plastics TYGON® tubing. Complete with stainless steel hose clamp. |
| J. Spigot | PP | 97424 | -- | -- | x | -- | -- | -- | -- | -- | -- | -- |
| With male 3/4 inch thread and neoprene seat gasket. Can be easily field-installed with bulkhead fitting. Requires 3/4 inch female National Pipe Thread (NPT) fitting for installation. |
| For tubing: | PVC | 3/8" ID to 9/16" ID (1/16 inch wall) |
| PVC | 9/16" to 5/8" I.D. (1/8 - 3/16 inch wall) |
| LDPE | 5/8" I.D. (1/16 inch wall) |
| Spigot, Needle-Type | PP | 716421
-0010 | x | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| Replacement spigot for Cat No 96423. Only fits on Saint-Gobain Performance Plastics-installed 1-1/8 x 12 inch straight threaded boss. Accepts 5/8 inch I.D. tubing. |
| Quick-Action Spigot | PP | 716422
-0010 | x | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| Only fits on Saint-Gobain Performance Plastics-installed 1-1/8 x 12 inch straight threaded boss. Spigot accepts 5/8 inch I.D. tubing. Adapter accepts 1/4 or 5/16 inch I.D. tubing. |
Back to Top
K. Bulkhead Fitting
L. Viton® Gasket
Installed Fittings, Mechanical
Open Top Tanks -- Installed Fittings, Mechanical |
| | Side Code and Availability (x) |
| Fitting | Mat'l | Cat No | -0025
1/4" | -0050
1/2" | -0075
3/4" | -0100
1" | -0125
1-1/4" | -0150
1-1/2" | -0200
2" | -0300
3" | -0400
4" | -0600
6" |
| K. Bulkhead Fitting | PVC
Installed | 87001 | x | x | x | x | x | x | x | x | x | -- |
PP
Installed | 88001 | x | x | x | x | x | x | x | x | x | -- |
PVC
Loose | 97001 | x | x | x | x | x | x | x | x | x | -- |
PP
Loose | 98001 | x | x | x | x | x | x | x | x | x | -- |
| Bulkhead fittings are supplied with one EPDM gasket. All two-part fittings screw together through a hole cut in the tank. Other gasket materials are available at added cost. |
| Flanged Adapter w/o Bulkhead Fitting | PVC | 93420 | -- | -- | -- | x | -- | x | x | x | x | -- |
| F. Sight-Gauge Assembly | PE/PVC | Installed
76000
-0001 | -- | -- | -- | x | -- | -- | -- | -- | -- | -- |
| Consists of PVC valves, fittings and translucent PE tubing (5/8 inch I.D. x 3/4 inch O.D.). Installed close to top and bottom of tank unless otherwise specified. |
| L. Gaskets for PP and PVC Bulkhead Fittings | EPDM | 48080 | -- | x | x | x | † | x | x | x | x | -- |
| VITON™ | 48090 | -- | x | x | x | † | x | x | x | x | -- |
*Where an additional gasket is needed, or as a replacement for original gasket.
†1-1/2 inch gasket can be used on 97001-0125 and 98001-0125 bulkhead fittings. |
Back to Top
Tank Diameter Minimums |
| Bulkhead Size (in) | Min Tank I.D. (in) |
| 1/2 | 7.25 |
| 3/4 | 10.00 |
| 1 | 11.75 |
| 1-1/4 | 16.25 |
| 1-1/2 | 16.25 |
| 2 | 25.75 |
| 3 | 42.50 |
| 4 | 90.00 |
Back to Top
The following accessories and factory-installed ferrules are available options for Saint-Gobain Performance Plastics sanitary tank products. Use them to modify the tank for your specific application. Specify fittings and placement locaiton when ordering tank.
Installed Sanitary Ferrules -- High-Density Polyethylene; Polypropylene; Polyvinylidene Fluoride
- Customize the vessels to your specific processing needs using the ferrules
- Accessories require 2" connections for installation
Installed Sanitary Ferrules -- HDPE |
| Cat. No. 2660 | -0075 | -0100 | -0150 | -0200 | -0300 | -0400 | -0600 |
| Size, mm; in. | 19; 3/4 mini | 25; 1 tri/ladish | 38; 1-1/2 tri | 51; 2 tri | 76; 3 tri | 102; 4 tri | 152; 6 tri |
Installed Sanitary Ferrules -- PP |
| Cat. No. 2661 | -0075 | -0100 | -0150 | -0200 | -0300 | -0400 | -0600 |
| Size, mm; in. | 19; 3/4 mini | 25; 1 tri/ladish | 38; 1-1/2 tri | 51; 2 tri | 76; 3 tri | 102; 4 tri | 152; 6 tri |
Installed Sanitary Ferrules -- PVDF |
| Cat. No. 2692 | -0075 | -0100 | -0150 | -0200 | -0300 | -0400 |
| Size, mm; in. | 19; 3/4 mini | 25; 1 tri/ladish | 38; 1-1/2 tri | 51; 2 tri | 76; 3 tri | 102; 4 tri |
4" and larger fittings may have placement restrictions.
Back to Top
Sanitary Gaskets -- Platinum-Cured Silicone |
| Cat. No. 2672 | -0075 | -0100 | -0150 | -0200 | -0300 | -0400 | -0600 |
| Size, mm; in. | 19; 3/4 mini | 25; 1 tri/ladish | 38; 1-1/2 tri | 51; 2 tri | 76; 3 tri | 101; 4 tri | 152; 6 tri |
Sanitary Gaskets -- Viton® Fluoroelastomer
Sanitary Gaskets -- Viton® Fluoroelastomer |
| Cat. No. 2671 | -0075 | -0100 | -0150 | -0200 | -0300 |
| Size, mm; in. | 19; 3/4 mini | 25; 1 tri/ladish | 38; 1-1/2 tri | 51; 2 tri | 76; 3 tri |
Back to Top
- For prevention of damage to plastic connection
- Autoclavable
True Union Clamps -- PVDF |
| Cat. No. 2670 | -0075 | -0150 | -0200 | -0300 |
| Size, mm; in. | 19; 3/4 mini | 38; 1-1/2 tri | 51; 2 tri | 76; 3 tri |
Recommended for use with plastic fittings.
Avoids over-tightening which can crack the fitting.
Maintains concentric connections.
Back to Top
Contact our customer service hotline at:
New Jersey, U.S. +1 800-435-3992
Outside U.S. +1 908-218-8888