Saint-Gobain...Leading the Way in Autoanalyzer Tubing
As the supplier to major peristaltic pump and analytical equipment manufacturers for over sixty years, Saint-Gobain has become the world leader in providing innovative tubing solutions for applications in industry and research.
Major autoanalyzer equipment and micro pump manufacturers rely on Saint-Gobain’s knowledge of polymers and extensive experience with the specific demands required of peristaltic pump tubing.
The range of physical demands on autoanalyzer tubing is too broad for one universal tubing solution. The information provided serves as a general guide in your selection of tubing. Consulting with Saint-Gobain Performance Plastics at an early stage of equipment development will assure that the optimum tubing formulation and configuration choices are made. Choices can be selected from either hundreds of current formulations or can be tailored to your own specifications.
With proven tubing formulations such as Tygon®, PharMed® BPT and Fluran®, Saint-Gobain Performance Plastics is uniquely qualified to broaden the base of market applications for autoanalyzer equipment.
Autoanalyzer Tubing -- Standard Formulations
| Tygon® R-3603 Laboratory Tubing |  | The standard of autoanalyzer tubings. Consistently unaffected by virtually all inorganic chemicals. Provides repeatedly reliable results. Low spallation. Meets FDA criteria.
|
| Tygon® F-4040-A Fuel and Lubricant Tubing |  | Formulated specifically to resist cracking when transporting fuels, lubricants and other hydrocarbon based fluids.
|
| Fluran® Tubing |  | Ideal for severe environments. Unequalled combination of chemical and temperature resistance. Resistant to weathering, ozone and UV light.
|
| PharMed® BPT Tubing |  | Provides unequalled flex life. Biocompatible, non-toxic and non-hemolytic, ideally suited for cell and tissue culture applications, repeatedly autoclavable, Meets USP Class VI requirements. Meets FDA, NSF 51, USP Class VI criteria. Fully tested to ISO 10993 standards.
|
| Tygon® 3350 Silicone Tubing |  | Temperature compatible to 400°F (204°C). Rubber-like resilience and recovery permits consistent delivery of fluids even in intermittent pumping applications. Ideally suited for transfer of sensitive fluids. Meets FDA, NSF 51, 3-A Sanitary Standards for Plastics and USP Class VI criteria. Fully tested to ISO 10993 standards.
|
Saint-Gobain provides standard configurations and formulations for Autoanalyzer tubing for two-stop configuration, three-stop configuration and nominal tubing without collars.
Standard Configurations and Formulations (PDF document)
Note: Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer's risk.
Contact our customer service hotline at:
Ohio, U.S. +1 800-798-1554- Outside U.S. +1 330-798-9240